Industry News

Home / News / Industry News / All About Enameled Wire Coating

All About Enameled Wire Coating

Magnetized wire or enameled aluminum wire is insulated copper or aluminum wire coated with a thin layer of aluminum or copper oxide. It's often used in electronics, electronic assemblies, inductors, capacitors, batteries, motors, transformers and many other industrial applications that require tight coils of wire for specific applications. Since it's very durable and long lasting, it makes it a good choice for industries where high temperature conditions are the norm.

It's important to note that wire coatings don't provide the same degree of resistance as solid wires. They do however, offer a much more uniform thickness over a longer period of time, resulting in a much higher wire's performance in all kinds of situations.

While some people believe that the coating is simply an added bonus to any wire's magnetic properties, there is no real explanation behind why this is the case. The coating was actually invented by a company in Pennsylvania as an effort to protect their products from rusting and corrosion.

With the coatings, the wire becomes resistant to corrosion because of the coating's ability to reduce the amount of oxygen that gets inside the wire. This prevents the wire from corroding because the oxygen doesn't have access to the wires inner core.

This kind of coating is commonly used for many different purposes. However, enameled wire is more commonly known as an alloy wire due to the fact that its alloy composition is entirely copper.

Copper and nickel are the primary metals used in making enamels and this is why they're often referred to as wire coats. The coatings also feature lead, zinc and tin.

Aluminum is generally substituted with other metals if the copper or nickel is found too expensive or difficult to obtain. Another common material used to make enameled copper or aluminum wire is tin.

Another substance, which is often used for the coating of metal is boron. Boron is a natural element that's used to bind with copper in order to form copper alloy. Since boron bonds with copper, it has the ability to create a smooth and even surface on the copper wire, which is also known as anti-corrosion properties.

Due to these properties of the copper, it's been a very popular choice for both the manufacturers and consumers of copper. In addition to protecting the copper from rusting, these materials also help it to be very long lasting.

Since copper is one of the more commonly used metals, it is naturally durable, but wire coatings are a way to extend the life of the wire. A good quality coating will usually last several hundred years, so it isn't uncommon to find that many wire coatings will be replaced every few years.

Since enamels are extremely durable, they are commonly coated with several different types of wire coatings. For example, gold is a great coating, but since it doesn't allow copper to conduct electricity, nickel is often used instead. Because copper does not conduct electricity, nickel coated wire is less likely to be susceptible to rusting.

A third coat that is often applied to copper is lead. This is because this is a very expensive coating, but it allows the copper to be used in electrical equipment and for industrial applications where it will need to be protected against corrosion. Enameled Wire solution at / .

When looking at the use of enamels for a variety of different reasons, you need to take into consideration the type of coatings that are available. Some of these coatings are often referred to as "patinas "coats," which is why they are sometimes referred to as "coating "coating coatings."